Performance characteristics of solar aerator 1. A floating pump suspended in deep water sucks in oxygen-poor water from the lower layer, and then shoots the water into the air from the nozzle to form a fountain, where water droplets of various sizes fall back into the fish pond. During the process, numerous water droplets expand the contact surface with the air Increased the amount of dissolved oxygen. 2. The falling water drops form a circle on the surface of the fish pond. The heavy rain impacts the surface of the water with bubbles and waves, causing the water in the pond to move, again playing the role of increasing oxygen. 3. The low-temperature and high-density oxygen-poor water in the small layer falls into the upper layer of the fish pond, which causes the water in the upper and lower layers of the pond to seal up the flow, and accelerates the oxygen-rich water to the technical parameters of the Solar Energy Aerator (1) easy to use: As long as the pump is put into the water and connected with a power supply, the water can be pumped No Port, not afraid of rain flooded, not limited by suction range, especially light weight, very easy to move. (2) Energy Saving: change the suction head to the pressure head, no matter what kind of specifications and models, the water inlet is always 25-50 cm away from the water surface, always in the good suction position, both shorten the pipe and do not need to install the bottom valve, it can save 10-30% of electricity. (3) Long Service Life: The shaft seal of the floating pump is not affected by the sediment on the bottom of the water, there is no deep water pressure, it is impossible to sink into the silt, so the shaft seal has a long service life.